: April 25, 2022 Posted by: bondstriet Comments: 0

How do you fill a Stihl trimmer line?

Quote from video on Youtube:The spool remove. Any remaining line. And then refit the new line one side at a time wind it on evenly. And then lock it off fill the other side again tight and even and lock. It off on the opposite.

How do you change the string on a Stihl weedeater?

Quote from video on Youtube:Right here you'll see there's a little hole. Where it connects into and then if you turn this over it shows you to wrap the line that way once you've got your string in the hole.

How do you wind the string on a Stihl trimmer?

Quote from video on Youtube:Note the winding direction arrows on the top of the spool. Turn the spool in this direction. And you will automatically wind the line onto the spool.

How do you restring a Stihl FS 56 RC?

Quote from video on Youtube:Take the end of the line that I'm holding and push the line into the slot on the housing. Next I'll unclip the second line from the notch and push it into the slot on the other side of the housing.

See also  What finger length means haircut?

How do I change the string on my head trimmer?

Quote from video on Youtube:But once you put down in the hole you have to turn the head. Until it locks in place okay. Right there it just locked. So now the other thing is most time they're threaded opposite.

How do you restring a strimmer?

Quote from video on Youtube:Even though you might have a different brand most string trimmers work generally the same. You can either pinch off the cap like this one or sometimes it's a pinch and twist or just a twist.

How do you restring a Stihl FS 91?

Quote from video on Youtube:Two still four stroke. But even that's a four stroke you still run to stroke Nick's in there so you mix it at 50 to 1 it's a straight shot a lot of really direct. Power to the cutter head.

How do you restring a Stihl FS 50 C?

Quote from video on Youtube:Set the way are up cut it in half. All you got to do is take one of each end make sure they're not tangled. Line up there are four slots on here you got to line up the arrows on the side.

How do you change the line on a Stihl fs38?

Quote from video on Youtube:All right the first thing you want to do is remove this bump knob. So you just twist it off. Counterclockwise. Then you want to pull this head off be careful because there's a spring in here.

What size line does a Stihl FS 50 use?

SPECIFICATIONS

See also  What are brush cutters?
Engine Displacement : 27.2 cc
Fuel Tank Capacity : 11.5 oz
Fuel Type : Gasoline
Handle Type : Loop
Line Diameter : 0.08 in

What line should I use for my Stihl trimmer?

The standard string for the TrimCut head is 0.105 inches in diameter, but you can install 0.095-inch string on this head. Some versions of the AutoCut head use 0.095- to 0.105-inch string, and some use 0.080- to 0.095-inch string; check the user’s manual for the trimmer head if you aren’t sure about yours.

How many feet of string does a Stihl trimmer have?

Stihl spools commonly hold two strands of line about 16 feet long. Turn the spool over and note the arrow on the bottom that indicates winding direction. Insert the end of one strand of cutting cord into either of the anchor holes in the spool compartment nearest the outer flange.