: April 25, 2022 Posted by: bondstriet Comments: 0

How do you put string in a Black and Decker Grass Hog?

Quote from video on Youtube:And then begin to wrap the line you'll notice on the spool that there's an arrow that determines the direction you wrap the line in this case it's counterclockwise.

How do you wind the line on a Black and Decker grass trimmer?

Quote from video on Youtube:Means you wind it in the direction of the arrow. It's very important that you wind the top side first which is the side that has the arrow printed on not the bottom of the spool.

How do you fill a Black and Decker trimmer line?

Quote from video on Youtube:Head you want to feed that line down through that hole. And then bring your spool. Back onto the shaft.

How do you restring an automatic feed spool?

Quote from video on Youtube:So just go ahead and get out of that groove. Might be easier with a pair of pliers. There we go and that navel string. Alright just going to cut it off at an angle to get it into that hole.

See also  Why has my pubic hair disappeared?

How do you fill a string trimmer spool?

Quote from video on Youtube:Thread each end of the line through the eyelets on the trimmer head as you connect the spool and bump knob wind the bump knob based on the arrows shown on the reel. Apply pressure to wind it evenly.

How do you replace the spool lever on a Black and Decker trimmer?

Quote from video on Youtube:I simply line up the radius on the lever. With the same radius on the spool. And then press it into the hole on the top of the spool. Now reinstall the line spool. And the spool cap.

How do you fill strimmer wire?

Quote from video on Youtube:Even though you might have a different brand most string trimmers work generally the same. You can either pinch off the cap like this one or sometimes it's a pinch and twist or just a twist.

How does Black and Decker Auto line feed work?

The Automatic Feed Spool (AFS) is the technologically advanced line feed system found on Black & Decker string trimmer products. Using centrifugal force, the system monitors the amount of line being used and feeds more line automatically as the cutting line shortens.

How do you put line on a grass trimmer?

Quote from video on Youtube:Find the two holes on top of the inner reel. And insert both ends of the line into one of the holes. Pull. The line through. Until two to three inches. Remain.

How do you install a Black and Decker automatic feed spool?

Quote from video on Youtube:Around the edges tape holds the line in place once in the packaging. Okay and it's going to be jammed up into a little hole there just kind of keep it in place just pull that out okay.

See also  How do I fix my trimmer line?

How do I fix the auto feed trimmer?

Quote from video on Youtube:First let's remove the cap over the reel. And you simply press in the tabs on the side. And you could easily pop off the top.